Release Notes

Information about firmware releases for product FLYsky Display.

Check Firmware Update procedure to update Display Firmware.

V1.0.6.0

Release Date: xx/xx/xxx

✨ New Features:
- Requires user "touch" to exit Warning screen
- Change labels colors in Radar View (CallSign and Vertical clearance that shows next to target on radar) to have the same color as target / alarm state
- Add new option, to hide the nearest target information (Right side panel) if the target is outside the current radar scale range
- Change startup screen image, to official product name

Release Date: 21/11/2025

🐛 Bug Fix:
- On the Vertical Declutter setting, the label with the current slider value was not being correctly updated, it could be showing the last changed value instead of current position of slider.
✨ New Features:
- The Vertical Declutter slider, the scale was changed to start at 500 and reduced the number of ticks
- Add new menu option to set on the Display own aircraft ID, this will make display to filter messages that may arrive for it's own ID
  - This is optional, by default is 0, that means no ID configured
- Increase font size of "scale" indication
- Lighten the color of radar scale lines
- Increase the touch area for the onscreen zoom buttons
- In case the DataSource is not SafeSky, the heading indication on radar page will only show if speed > 4kmh
- Do not generate alarms for traffic if OnwShip is on Ground, or if the target is also on Ground (this is configurable)
  - Added new option to control alert generation on case OnwShip is on Ground or if target is on Ground
  - At the moment the Ground detection is based on speed threshold. The behavior will depend on the data source. For example SafeSky App only sends targets that are not considered to be on Ground even if speed is zero.
- Added new option to control if ModeS indication only shows if the ModeS target is the closest target to the Display. (Using the distance information from the source, may have error)

Release Date: 10/11/2025

🐛 Bug Fix:
- Revision of Information texts
- Alerts Popup no longer indicate COLLISION but instead CAUTION, WARNING and DANGER according to alert level
- Fix issue that the screen Zoom buttons could be disabled when the Display exited an alert state, in case the new zoom scale in alert state was the minimum scale or maximum scale
- The No Internet popup information could appear in other situations when not using SafeSky App
✨ New Features:
- New way to show alerts on screen.
  - By default still uses the popup, user needs to go to config to change behavior
- Main page was significantly changed, to attempt to maximize used space and increase the font size of the information on the right side panel
  - Added config option to hide the zoom button on the screen
  - Added config option to hide the nearest target information (text information on the right side panel)
    - Arrow will show to indicate the direction of nearest aircraft
    - This information will show in case of alert
- Save the last used Wifi password, even after making a disconnect, if the next network used to connect is the same it will reuse the password
  - Add extra button to force clear the stored password
- Changed the Vertical Decluttering slider value to range 600ft to 5000ft
- Added new config option related to device units
  - Allow configuration of distance units, between nm and km
  - Allow configuration of altitude units, between ft and m

Just Bug Fixing version

Release Date: 04/11/2025

🐛 Bug Fix:
- Solve issue where with iOS devices (iPhone / iPad) the Bluetooth symbol could stay red even if connected to SafeSky App via BLE.

Was suppose to be released later, but some final touches before EATS 2025

Release Date: 04/11/2025

🐛 Bug Fix:
- There where some conditions where the Exclamation Symbol used in case of Mode-S aircraft (in replacement for Arrow) could appear rotated
✨ New Features:
- Highlight nearest target with same color as Arrow
  - If in Alert mode, the highlighted target will be the target that generated the alert
- Increase "Font" size of information on the right side panel

Release Date: 04/11/2025

🐛 Bug Fix:
- Fix GPS Heading to 0º if speed lower than 4Kmh.
  - Try to avoid orientation changes when stop due to GPS fluctuations
- Fix missing CallSign on popup to Enable/Disable alert to specific target
✨ New Features:
- Added new radar symbol for targets type Jet and Glider
  - Need confirmation regarding Glider when using AeroTracker...
- Added configuration option to set the radar default scale used after a power up
- Added Button to save the current Display Brightness as the default
- Restore Radar Scale when exiting alarm state
  - Only if user hasn't changed the scale during the alert state
- Added Arrow next to target to indicate if ClimbRate is Positive or negative
  - If option Show Vertical Distance is disabled on configurations, it will show + or - to indicate if above/bellow
    - Even with option disabled, the arrow will always be shown

Release Date: 30/10/2025

Due to internal restructure of Display configurations, when updating to this version the previous configurations will be lost and reset to defaults.

Release Date: 21/10/2025

First Official version.